9″- 10” Submersible Motors

Catalogue Download

Salient Features

  • High Efficient electrical design and low operation cost
  • All Motors Pre filled and 100% Tested
  • Strong & Robust Construction to survive any site condition
  • A special Diaphragm ensures pressure compensation inside the motor
  • Water lubricated thrust and radial bearings enable a maintenance free operation
  • Cooling material according to drinking water regulations
  • Motor manufactured in ISO 9001 certified manufacturing facility
  • Motor mounting with NEMA & Non NEMA standard

Application

  • Field Irrigation
  • Private / Public water supply
  • Flow / Drip / Sprinkler irrigation
  • High rise building & Fire fighter

Product Range
Characteristics Three Phase
KW / HP 60.0/80.0 – 93.0/125.0
Volt 50Hz 380/415
60Hz 220/380/460
Insulation class Y Class as per IS 1271
Degree of Protection IP68
Type of Duty S1
Electrical Winding WET type Rewindable
Ambient Temperature 45˚c
Starts per hour 10
Minimum Cooling Flow 0.5 m/s
Available MOC Cast Iron

Material Of Construction 
Component Cast Iron 
Stator Body / Shell Stainless Steel
Connection Piece C.I. FG200 IS 210
Upper Housing C.I. FG200 IS 210
Lower Housing C.I. FG200 IS 210
Base Cover C.I. FG200 IS 210
Winding Wire PVC / PP
Thrust Bearing Segment AISI 420
Rotor Shaft AISI 410
Shaft END Stainless Steel
Shaft Seal Oil Seal / Ceramic / Carbon
Bearing Bush Graphite Carbon / LTB5
Diaphragm NBR
Lead Cable Rubber / PVC
Sand Guard NBR
Hardware Stainless Steel 304